Measure one rectangle in feet and inches. Get square feet, square meters and square yards.
Measure one rectangle inside the walls. Blank feet or inches count as zero.
Enter the known measurements and press Calculate. Your answer, units and calculation will appear here.
For this USA area calculator, convert each measurement to decimal feet, then multiply length by width. Decimal feet = feet + inches ÷ 12. Area in square feet = length in feet × width in feet.
12 ft 6 in is 12.5 ft. So 12.5 × 10 = 125 sq ft, about 11.6129 m² or 13.8889 sq yd. Inch fields accept decimal inches from 0 to less than 12.
This tool measures one rectangle. For a room, measure inside the walls. It does not classify finished living space or apply ANSI, appraisal, building-code or permit rules. It does not add multiple rooms or waste for flooring and tile.
For an irregular area, measure separate rectangles and add their areas yourself, avoiding overlap. Use the Area Converter for units. For external-wall built-up area using metre inputs, use the existing Plinth Area Calculator; that is a different measurement.
No. Feet measure length. Square feet measure area. A rectangle 8 ft by 9 ft covers 72 sq ft, not 72 ft.
Yes. Enter 0 Feet and 9 Inches for length, and 0 Feet and 8 Inches for width. The area is 72 square inches, which is 0.5 sq ft.
Use decimals in the Inches field: 1/2 inch = 0.5, 1/4 inch = 0.25, and 3/4 inch = 0.75. For 6 1/2 inches, enter 6.5. Keep Inches below 12.